If I reboot my 7020, sometimes the problem goes dreambox 500s channel list away and sometimes it doesn't. Error 10057 dreambox control center. Error 10057 in function send. Socket is not connected. DCCv2.96 by BernyR. Dreambox Control Center. Status: Open; Question Views: 7515; Answer.

Before the crash of my dreambox I had no problems acquiring an IP for it in the Dreambox Control Center, using it in the browser ( Firefox ). Since it was returned to me, it has been a nightmare trying to get an IP. The search function has thus far given me two IP's.

The first one 192.168.0.164 worked briefly, the second one 192.168.0.248 never did. In the firewall settings I allowed Dreambox Control Center to have access in and out, and in the log file I can see its quite active at going places, but its obviously not doing anything for me. Both my PC's work and the client connects to the internet through the host PC. The host PC connects to the internet through Huawei fixed wireless terminal.I have run the network set-up wizard numerous times with everything turned on, it has not helped, as a matter of fact after the last time I got all red lines from the switch to the dreambox, to the PC. This is driving me crazy and so far this dreambox has been a waste of money.

In the communication setup window it has been reading as follows. IP: 10.0.0.97, DHCP is checked, Netmask 255.0.0.0, Type LAN, Name Server 192.168.0.1 which is the host PC, Gateway 127.0.0.1 Enable Network is checked, port 80, I have spoken to PhuketSatellite about this and he told me to get a router instead of the switch I have, which works. I went so far as to get a router, but the computer shop I go to said that a router wont work with a wireless internet setup. Any advise on getting this small Nightmarebox to work would be great. I don't know what image is in there now. THE CP is whats on the screen. Xbox one controller pcb diagram.

I think I have a similar problem with Aiji cordless dial up, cannot connect through a router but all have to go direct to comp.What I have to do all the time I go on and off is, uncheck DHCP and enter the IP address you want, actually showing on the DCC, then save. After that do the connection and GREEN bar will come on connected.only when one of the two goes off I find the IP address changes again on the DM.

Try check off the DHCP and enter IP manually on DM, also you can choose to enter the number on the DM ip,manually on the dcc. Or search on the dcc and accept. I think I have a similar problem with Aiji cordless dial up, cannot connect through a router but all have to go direct to comp.What I have to do all the time I go on and off is, uncheck DHCP and enter the IP address you want, actually showing on the DCC, then save. After that do the connection and GREEN bar will come on connected.only when one of the two goes off I find the IP address changes again on the DM. Try check off the DHCP and enter IP manually on DM, also you can choose to enter the number on the DM ip,manually on the dcc. Or search on the dcc and accept.

Thanks cogil. That's something I can try tomorrow. Will let you know how it works.

Previously, before the crash it worked by itself, when it had Nabilosat image in it. I think I have a similar problem with Aiji cordless dial up, cannot connect through a router but all have to go direct to comp.What I have to do all the time I go on and off is, uncheck DHCP and enter the IP address you want, actually showing on the DCC, then save. After that do the connection and GREEN bar will come on connected.only when one of the two goes off I find the IP address changes again on the DM.

Try check off the DHCP and enter IP manually on DM, also you can choose to enter the number on the DM ip,manually on the dcc. Or search on the dcc and accept. Cogil: Today I sat down and attempted to follow your instructions. I unchecked the DHCP and entered an Address which has worked before, after that I finally got a network connection showing from the switch to the PC ( previously the line was red now turned green ) I then entered the address into the Control Center and pressed reconnect. I then get a error message ' 10057 in function socket not connected '. I tried this with 3 different addresses.

I then re- checked DHCP and did a search for an address but none was found. I unchecked DHCP to try a search that way which also got no results. The Dreambox Control Center has full access in and out of the firewall and it asks for it when the computer is booted up, I allow access after connecting to the internet. I am using Dreambox Control Center v2.93 I also tried 2.94. I unchecked DHCP rebooted the computer, started up DCC and there was no longer any network connection from switch to PC the line is now red again, and DHCP checked itself in the communication setup window of the Dreambox, I suppose because of not pushing save.When I uncheck DHCP enter address 192.168.0.164 and enter same address in Control Center the connection between switch and PC turns green again but the connection to the Dreambox remains red.

Cogil: Today I sat down and attempted to follow your instructions. I unchecked the DHCP and entered an Address which has worked before, after that I finally got a network connection showing from the switch to the PC ( previously the line was red now turned green ) I then entered the address into the Control Center and pressed reconnect. I then get a error message ' 10057 in function socket not connected '.

I tried this with 3 different addresses. I then re- checked DHCP and did a search for an address but none was found. I unchecked DHCP to try a search that way which also got no results.

The Dreambox Control Center has full access in and out of the firewall and it asks for it when the computer is booted up, I allow access after connecting to the internet. I am using Dreambox Control Center v2.93 I also tried 2.94.

Before the crash of my dreambox I had no problems acquiring an IP for it in the Dreambox Control Center, using it in the browser ( Firefox ). Since it was returned to me, it has been a nightmare trying to get an IP. The search function has thus far given me two IP's. The first one 192.168.0.164 worked briefly, the second one 192.168.0.248 never did.

In the firewall settings I allowed Dreambox Control Center to have access in and out, and in the log file I can see its quite active at going places, but its obviously not doing anything for me. Both my PC's work and the client connects to the internet through the host PC.

The host PC connects to the internet through Huawei fixed wireless terminal.I have run the network set-up wizard numerous times with everything turned on, it has not helped, as a matter of fact after the last time I got all red lines from the switch to the dreambox, to the PC. This is driving me crazy and so far this dreambox has been a waste of money. In the communication setup window it has been reading as follows. Hunger games hdpopcorn. IP: 10.0.0.97, DHCP is checked, Netmask 255.0.0.0, Type LAN, Name Server 192.168.0.1 which is the host PC, Gateway 127.0.0.1 Enable Network is checked, port 80, I have spoken to PhuketSatellite about this and he told me to get a router instead of the switch I have, which works.

I went so far as to get a router, but the computer shop I go to said that a router wont work with a wireless internet setup. Any advise on getting this small Nightmarebox to work would be great. I don't know what image is in there now. THE CP is whats on the screen.mellow, the dreambox is not a waste of money. U had some bad luck until now. Hang in there until all is solved.you dont need a router, though preferable.let us know the ip of ur pc.

And also if its a fixed ip.the thing u shud do in the meantime is check ur LAN cable connected to the box.then remove power from modem, switch and all connected (incl. Box and comps).restore power.from what i c ur modems ip is set at 192.168.0.1type this in ur browser and check Start IP Address: and End IP Address:now if the box is still not working with dccIP: 192.168.0.164, (or ip in range of Start IP Address: and End IP Address)DHCP is NOT checked,Netmask 255.255.255.0,Type LAN,Name Server 192.168.0.1Gateway 192.168.0.1Enable Network is checked,port 80if all is working again, try to connect ur pc's direct to the switchgood luck. The person who told you that the router will not work in a wireless internet setup should be hit on the head, and hit HARD enough. You should find a router that has bridging mode capability, that way, you don't even need a computer to dial-in your connection.

All your pc and dm will connect to the router. Pc/dm - router - modem - internet.i am not an expert in DM as well, but the way i see it, you have a conflict in your IP range. Try to make this:1. On the main pc which is connected to the internet, make the IP of 192.168.0.1 (this will be your gateway IP/PC)2. On your host pc (if you have any) make the IP of 192.168.0.23. Assign the IP 192.168.0.3 to your dreambox.4.

Make all of this on the same subnet.DISABLE all presence of DHCP everywhere! DCHP will simply give you headaches, since you are only managing a handfull of internet devices, you might as well do it manually for troubleshooting purposes. The person who told you that the router will not work in a wireless internet setup should be hit on the head, and hit HARD enough.

You should find a router that has bridging mode capability, that way, you don't even need a computer to dial-in your connection. All your pc and dm will connect to the router.

Pc/dm - router - modem - internet.i am not an expert in DM as well, but the way i see it, you have a conflict in your IP range. Try to make this:Still appreciate your training,would this router have a connection for modems with com 1 9pin connector or usb connection. All this phones only have the two for connection to the computer, but not the 'LAN - Ethernet' kind of connector.I also want to use a router as on your advise.

. Error 10057 Dcc will appear and crash the current program window. Your computer crashes frequently showing Error 10057 Dcc whilst running the same program. Your Windows runs slowly and mouse or keyboard input is sluggish. Your computer will occasionally 'freeze' for a period of time.Error 10057 Dcc and other critical errors can occur when your Windows operating system becomes corrupted. Opening programs will be slower and response times will lag. When you have multiple applications running, you may experience crashes and freezes.

There can be numerous causes of this error including excessive startup entries, registry errors, hardware/RAM decline, fragmented files, unnecessary or redundant program installations and so on. There are many reasons why Error 10057 Dcc happen, including having malware, spyware, or programs not installing properly. You can have all kinds of system conflicts, registry errors, and Active X errors.

Reimage specializes in Windows repair. It scans and diagnoses, then repairs, your damaged PC with technology that not only fixes your Windows Operating System, but also reverses the damage already done with a full database of replacement files.A FREE Scan (approx. 5 minutes) into your PC's Windows Operating System detects problems dividedinto 3 categories - Hardware, Security and Stability. At the end of the scan, you can review your PC's Hardware, Security and Stability in comparison with a worldwide average. You can review a summary of the problems detected during your scan. Will Reimage fix my Error 10057 Dcc problem? There's no way to tell without running the program. The state of people's computers varies wildly, depending on the different specs and software they're running, so even if reimage could fix Error 10057 Dcc on one machine doesn't necessarily mean it will fix it on all machines.

Thankfully it only takes minutes to run a scan and see what issues Reimage can detect and fix.Windows ErrorsA Windows error is an error that happens when an unexpected condition occurs or when a desired operation has failed.